6 GHz Low Noise Amplifier design with 65nm CMOS for 5G/6G Applications 5G/6G Uygulamaları için 65nm CMOS ile 6GHz Düşük Gürültülü Yükselteç Tasarımı


Eren T., Oktay Z. N., DOĞAN H., SAVCI H. Ş.

12th International Conference on Electrical and Electronics Engineering, ELECO 2020, Bursa, Türkiye, 26 - 28 Kasım 2020, ss.88-92 identifier identifier

  • Yayın Türü: Bildiri / Tam Metin Bildiri
  • Doi Numarası: 10.1109/eleco51834.2020.00021
  • Basıldığı Şehir: Bursa
  • Basıldığı Ülke: Türkiye
  • Sayfa Sayıları: ss.88-92
  • İstanbul Medipol Üniversitesi Adresli: Evet

Özet

It is envisaged that 6G network technology will be popular due to its higher working frequencies than 5G networks, and this will ensure higher data rates, greater capacity and lower latency. 6G mobile technology will support sub-microsecond delays which makes communication almost instantaneous. Realization of these goals depend on faster circuits with low noise levels in both transmitters and receivers. In this work, a low noise amplifier (LNA) was designed in 65nm UMC CMOS technology with Cadence Spectre. Differential common source topology with integrated inductors were utilized to achieve low differential noise and better matching performance with higher gain. Proposed LNA has 20dB gain at 6GHz, and the gain is higher than 13dB from DC to 8 GHz. Minimum noise figure is 2.24 dB and S11 is -30dB at 6GHz. Simulated IIP3 is -6.5dBm. The design works with 3.6 mA total current from 1.2V supply voltage.